When your car battery stops working, you may think of taking it to a mechanic. While this is always the best way to go, if you happen to have some experience in car repair, then you should definitely try to solve the problem yourself.
Before you go to the garage, make sure to check out this guide. In just 10 minutes, you can fix most car battery problems. Sometimes Corrosion may happen in the car batteries so make sure to check the corrosion. The corrosion can be very dangerous and can even cause a car to explode if not fixed soon enough.
Here you will find all the necessary information about How to Clean Car Battery Corrosion? You will be amazed by how easy it is to do. It’s always good to clean your car battery and maintain the life of the battery. However, many people are confused about how to do it. This article will help you learn how to clean the car battery corrosion quickly.
Car battery corrosion is a well-known problem that can destroy the performance and safety of your car. But it can be prevented with a few simple steps.
Step By Step Instructions to Clean Car Battery Corrosion:
Batteries get wet when they get old, and they start to corrode, which makes them leak acid into your car.
While many people know to clean out their engine oil, they don’t know about cleaning out the battery, which is also important if you want to keep your car from running like crap for a very long time.
Did you know that the average car battery has a lifespan of around two years? If you’ve been driving for a long time, your car’s battery may already be a bit corroded, and it’s time to clean it up and get it running at its best.
In this article, I’ll show you how to clean your car battery, even if it’s corroded badly. It’s easy, it won’t cost you anything, and it can save you hundreds or thousands of dollars in repairs.
Even if you just know that your battery is starting to die, this article will provide you with all the information you need to clean it and keep it running as long as possible. So let’s start.
Step 1. Ensure That Your Car Had Been Turned Off:
When cleaning the battery, it’s imperative that you turn off the engine first before attempting to perform any battery cleaning procedures. This is an important safety precaution that you should take for your own sake and that of the people who have to travel in the vehicle.
You’ve just cleaned the battery of your vehicle and it looks great, but do you know what else you need to do before driving off? We’re going to dive into that today, starting with the fact that your headlights will still be on, even if you’ve turned the engine off.
Step 2. Remove the Cables, Working on the Negative One First:
If you have never removed the cables from your car battery before, then you are missing out on a lot of fun. Removing the cables is surprisingly easy, once you get past the first few moments of fear and confusion.
As soon as you have removed the cables, you are going to find that the battery is much lighter. You will also notice that there are fewer and less difficult-to-reach spots to put things like a key chain.
Step 3. Check the Car Battery for Any Damages:
When it comes to car battery maintenance, it is important to ensure that the battery is safe. The battery should always be checked for any damages when it is being cleaned. This can prevent the car from being in trouble later on. It is also helpful to check the battery for any leaks and any other abnormalities that can cause the battery to be damaged.
If your battery has been removed and you are not sure what to check, here is a list of what you should be looking out for while cleaning your car battery.
Step 4. Check the Car Battery Cables and Clamps for Any Damage:
Car batteries usually have the same size as cables. However, some of the brands might have different sizes of cables. Checking your car battery cables and clamps is a must if you are planning to clean the car battery. If the cable is damaged or it is not attached properly, the whole process might be affected.
Car battery cables are the connections between your battery and the charger or the alternator. This part of your vehicle’s electrical system is very important, and the way you connect these parts is also very important.
Step 5. Clean off the Corrosion With a Cleaning Agent or Baking Soda With Hot Water:
If you are looking for the best way to clean off the corrosion on your car battery, then it’s time to look into other options. While cleaning the car battery, usually use baking soda or a cleaner to clean the corrosion on the positive terminal. Most people don’t have a problem using baking soda on their hands, but some people can’t stand it. The same is true with dishwashing liquid.
Step 6. Rinse the Car Battery and Cables:
Most car batteries require cleaning and maintenance, and some need to be replaced. But with so many different methods to clean them, it can be hard to choose one. But the other best step is to rinse the car battery and cables. When you’re cleaning your car battery, you’ll want to make sure that you don’t use a wire brush or anything else that will damage your wires.
You can get by without a wire brush or even a towel. You can also make sure that you clean all the contacts on the terminals and the positive terminal with a toothbrush.
Step 7. Dry the Battery:
Now this is the time to Dry your battery while cleaning the car battery
Step 8. Reconnect the Cables, Starting With the Positive Cable:
If you’re using a car charger with a battery, you should always connect the positive cable before you disconnect the negative one.
If your car battery starts making noises or the headlights don’t turn on, it may be because of a corroded battery. You don’t need a fancy car to suffer from this problem, because it affects all types of vehicles. If your vehicle has not been serviced for a while, it might not have a fully charged battery.
So read this post carefully and know the most common reasons why your battery is corroded and how you can prevent it.