Are you experiencing trouble with your car’s computer? Maybe it’s not starting up or giving you the correct information. In either case, a reset may be in order.
This guide will walk you through how to reset car computer without disconnecting battery an important process if you want to keep your car’s warranty intact. So whether your car is acting up or you just bought it and want to start fresh, read on for instructions on how to reset your car’s computer yourself.
What Is A Car Computer And Why Would You Want To Reset It?
A car computer is an electronic control system inside of your vehicle. It controls all the important functions like ignition timing and fuel mixture to make sure everything runs smoothly. As such, it’s very sensitive to even small changes.
If you’ve done something like put a higher octane gas in your tank than it can handle, you may have issues with your car’s computer. When that happens, the best course of action is to reset your car’s computer to fix any problems it may be having because of recent changes.
You should also reset your car’s computer every now and then just for good measure. We all change our cars on a regular basis- new shocks, better seats, etc. Naturally, all of the new settings you’ve given your car will make it run a bit differently.
Resetting your car computer will put everything to normal again and ensure that lights aren’t on when they shouldn’t be or any other number of issues. It’s also a good idea to reset your car’s computer if you have been playing around with the engine, such as adjusting your rev limiter or changing the idle speed.
How Do I Reset My Car’s Computer?
First of all, you need to be sure that you have a clear idea of what exactly is going wrong with your car and if a reset will help solve the issue. If it starts up just fine but doesn’t shift right, for example, a reset may not help.
To begin the process of how to reset your car’s computer without disconnecting the battery, you’ll need to find your car’s “fuse panel.” This is normally under the driver’s side dash somewhere and should have several numbered fuses in it. If you can’t find it, try looking under the hood in a compartment near where you would find an oil dipstick or spare tire.
Once you’ve found the fuse panel, open it up and start scanning through the fuses until you find one labeled “CMP,” which stands for the camshaft position sensor. If your car has more than one of these (sometimes there’s more than one, sometimes not), then just use the first one you find. If your car has an “IGF” or “IAC” fuse instead of a “CMP,” that is entirely fine as well and will work perfectly for this process.
1) Start by cutting power to your car- most people will just pull the fuse. On some cars, however, the best way to cut power is to disconnect the battery.
2) After cutting power, leave it off for 10 seconds before replacing the fuse and starting your car again. This is called “bouncing” and this is what resets your car’s computer.
3) If everything is going right, your car’s computer will reset! This means that any “check engine” lights or other warning messages your car was giving you should be gone now.
That’s basically it- a very simple procedure for how to reset your car computer without disconnecting the battery and one that costs little to no time or effort. As such, there really is no reason not to do it every now and then just for good measure.
What Are The Different Methods To Reset A Car Computer Without Disconnecting The Battery?
The surefire way to reset a car computer is to have a spare fuse available and cut power. On most cars, this will take 10 seconds or so of your time and will allow you to get on your way safely in no time at all.
If you don’t have a fuse handy though, there are other methods you can use. The first is to remove a fuse and put it back in after 10 seconds. This will work for some cars, though you might have to try a few different fuses before finding one that works.
If this doesn’t work, then the next best option is to disconnect your car’s battery for 30 seconds or so. This should work as well, as long as you’re not driving for a while. If it doesn’t, then your car may have been affected by something more drastic and require professional attention to fix the error that is now present on its computer.
The Benefits Of Resetting Your Car Computer:
- Put everything back to normal
- Get rid of “check engine lights” and other warning messages
- Fix any issues that your car may be having
What Are The Drawbacks?
- Very low cost
- Time taken is very low
- No real downsides to doing this, although if you didn’t fix your problem by resetting your car computer, then there isn’t much else you can do at that point.
Overall, resetting your car computer is a very useful skill that anyone can benefit from. This will teach you how to do just that and in about five minutes or less, you’ll know exactly what needs to be done if something goes wrong with your car’s electronic system.